Orca
Tandem PPG
A perfect tandem/paramotor paraglider
Description
The canopy fills and rises without problems or lagging behind. The wing stabilises easily and takes off with just a slight brake input.JIf you are an experienced pilot and want to share your joy of flight with the poor beggars who haven't tasted it so far, then Orca is for you. It will easily take both of you into the air, safely guide you through the thermals and finally smoothly put you back to Earth. This doesn't mean that Orca is some heavyweight trailer though - whenever you need to impress your passenger with some swift manoeuvres, in its agility Orca will not let you down.
Orca's glide ratio can be compared with that of a single-seater. It behaves splendidly in turbulence, damping all pitch, roll and yaw oscillations. Even with the trimmers fully off there is no problem whatsoever with frontal collapses!
And when you approach the landing field, slight braking will effectively reduce your speed, allowing for smooth landing.
Technical Data
| Size | Orca 41 | Orca 45 (out of production) |
| Certification | AFNOR-Biplace | - |
| Number of cells |
57 | 57 |
| Surface area (flat) [m2] | 40,88 | 45,07 |
| Surface area (projected) [m2] | 35,63 | 39,28 |
| Span (flat) [m] | 14,44 | 15,16 |
| Span (projected) [m] | 11,72 | 12,31 |
| Aspect ratio (flat) | 5,1 | |
| Aspect ratio (projected) | 3,86 | |
| Sink rate* [m/s] | min = 1,1; trim = 1,2; max = 1,8 | |
| Speed* [km/h] | min = 24; trim = 39; max = 46 | |
| Weight of the wing [kg] | 9,7 | 10,9 |
| Weight ranges [kg] | 140-210 | 170-310 |
| Lines | Dyneema Ultimate: 1,1 & 1,5 & 1,9 & 2,5 | |
| Risers connection width [cm] | 60 ± 5 | |
| Fabric | SkyTex Evolution 40 g/m2 (E85A) SkyTex Classic 40 g/m2 (E38A) SkyTex Hard 40 g/m2 (E29A) SR-Scrim 180 g/m2 |
|
* measured in the middle of the weight ranges (pilot + passenger + 20 kg)
Download
Manual:
Wersja polska (pdf) 1.82 MB English version (pdf) 2.46 MB French version (pdf) 1.90 MB
Opinions
If you would like to share you opinion on the paraglider, please send a couple of words to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Your thoughts will be published on our website.